The Ghost Immobiliser
Immobilisers are an effective tool in the fight against vehicle theft. They prevent the car from starting if it doesn't have an ignition key fob. They also work well to stop hotwiring or other traditional methods of vehicle theft. Modern methods such as key cloning or relay theft are becoming more common.
The Ghost Immobiliser was designed to combat these new trends and make your vehicle unnoticeable. It doesn't make use of LED indicators, radio signals or key fobs. It is quiet and stealthy.
Easy to install
The Ghost Immobiliser is a revolutionary device that connects to the CAN data network inside your vehicle to prevent key theft and cloning. It is a TASSA approved product, and is recognized by insurance companies. It is silent and virtually unnoticeable to thieves. It uses buttons on your steering wheel, centre console, and door panels to create an individual pin code sequence that must be entered before you can start your car. You can create up to 20 different sequences in order to increase security. The system is easy to install and does not require any additional wiring or hardware.
It is recommended that you use an accredited immobiliser CAN installer who is specialized in your specific vehicle type to get the best results. Ideally, they will have a workshop located in your local area, allowing you to go and get your installation completed. They will also have a variety tools and materials to help you in the process of installing. They will provide basic hand tools, multimeters, insulation tape, and heat shrink tubing to safeguard the connections. A user manual will give you the necessary instructions for the wiring in your vehicle.
Remove the battery prior to starting the installation process to avoid short circuits or airbag deployment. It is essential to verify the exact location of the CAN H and CAN L wires, as incorrect identification could lead to an inefficient system integration. It is also a good idea to label or mark the wires. Use a multimeter to confirm that the power source is providing an uninterrupted 12V.
Advanced thieves employ various methods to bypass the Ghost Immobiliser. These include jamming and spoofing signals. These methods are based on amplifying the signal that is transmitted from your key fob to the vehicle's electronic control unit. With advanced anti-jamming techniques and vigilant monitoring your vehicle, it can be protected from these sophisticated attacks.
Security Improved
A ghost immobiliser offers an extra layer of security to guard your car from theft. It has an PIN security system that can be entered by pressing buttons on your dashboard or steering wheel making it difficult for thieves to take your vehicle. The device is designed to be hidden inside your vehicle. It does not have lights or other indicators to alert burglars to its presence. It connects directly to the ECU of your vehicle via the data bus. This means it isn't vulnerable to relay attacks or hacking.
The system is an excellent investment for those who own prestige vehicles, as they are at greater risk of theft due to their worth and their popularity. Its enhanced security features guard against key cloning, ECU swapping, and other threats to your car's security. Some ghost immobilisers may be linked to an app, so that you can easily arm and dearm them. They can also be equipped with an option for service/valet that allows you to temporarily disable them while your vehicle is being serviced or repaired.
Another great feature of ghost immobilisers is that it doesn't require any cutting of wire. This is a great feature, especially if your car is newer and does not include an immobiliser. Certain systems can also be integrated with GPS tracking devices, providing additional security to your vehicle. A GPS tracker may also reduce your insurance rates. If you decide to purchase a ghost immobiliser ensure that it is TASSA verified and that a professional installer installs it for you.
Compatible with all major brands and models
The Ghost Immobiliser is designed to work with all major brands and models of vehicles that will protect your vehicle from theft. It uses buttons in your steering wheel, the centre console, or door panels to generate a unique pin code which must be entered before you can drive your car. The system is secure, undetectable, and is covered by a three-year warranty. It is also fully certified by insurance providers, which means that it can help to reduce your premiums.
In contrast to standard immobilisers that make use of your key fob to control the ignition, the Ghost system operates by directly connecting to the engine controller unit using the CAN data bus. This means it's impervious to tampering, and is virtually impossible to remove or disable and is not stolen by organised car thief groups. The Ghost system can also be integrated with an iPhone app to allow remote monitoring and management.
You can create an PIN that is simple to remember, but mathematically unattainable to thieves. The PIN can be customised and changed at any point and you can ensure your vehicle is safe even when you park it on the street or in a parking lot. autowatch ghost immobiliser can also choose the valet or service mode in the event that someone else requires your vehicle temporarily for instance, when it's in the garage. This is an excellent way to stop your vehicle from being stolen by a scammer mechanic. To give you more peace of mind you can choose a Ghost call alert to inform you when your car is in motion or if it has been moved.
Convenience
The ghost immobiliser shields your vehicle from theft methods such as key relay or cloning. It works by connecting to the car's CAN network and preventing communication with the engine ECU. This system makes it difficult for thieves to hack or clone your vehicle.
Once the system is installed, you'll be required to enter a PIN sequence up to 20 digits using the buttons on your dashboard and the steering wheel to start the engine. The system is completely concealed, and therefore undetectable by thieves. It does not emit radio frequency signals. It can be set up with a PIN code that can be changed by the user, adding to its security. The system is also designed to prevent cutting of circuits and makes it virtually impossible to alter.
If you get lost in your PIN, there are some systems that let you communicate with the immobiliser using an app on your phone to disarm it immediately. Some systems also have a service/valet setting that allows you to temporarily to start your car, for example when you drop it off at valet or garage.
The Ghost Immobiliser is also undetectable to thieves because it doesn't transmit radio signals, a major advantage over other aftermarket car security systems. It is also easy to use, and doesn't require complicated wiring. It can be used conjunction with dash cams for added safety. Dash cam Thinkware F70 features clear and sharp 1080p HD footage, Format Free Technology, and parking mode. The system is able to be hardwired to ensure maximum performance and durability.
Installation
If you're looking to secure your vehicle from thieves It is essential to choose the right immobiliser ghost. This device will prevent car thefts by blocking the communication between key fobs as well as the engine controller unit. This prevents thieves from intercepting the signal and then cloning the key fob to begin your car. It can also detect any time it has been tampered with and alert the owner of the vehicle.
The device is simple to install and can be integrated with the existing systems in your vehicle. It does not require any modification to the wiring of your vehicle and can be concealed in a secluded location, such as under the dashboard. To ensure that the device is properly installed, follow the instructions in the user manual. It is also essential to test the system after installing it. This will confirm that the immobiliser ghost is functioning in the way it is intended.
You can purchase an Autowatch Ghost 2 Immobiliser from an approved installer and get it installed on your vehicle. The installer will connect the Ghost to the CAN Bus network in your vehicle, which makes it difficult for thieves to remove or disable the system. The installation process generally takes between 2 and 3 hours.
It is recommended to look up the wiring diagram of your vehicle prior to the installation process. This will help you identify the CAN High and CAN Low wires needed to connect the Ghost to your vehicle's engine. It is also crucial to double-check the connections to make sure that they are secure and insulated.
Once the installation is complete after which you can use the Ghost Immobiliser during normal operation. It will turn off the ignition of your vehicle if you don't start it with the correct PIN, which you can enter yourself. The immobiliser ghost cost can also be put into Service/Valet mode in the event that you have to surrender your vehicle for maintenance or valet parking.