Ghost Immobiliser Fitting
Protect your vehicle from theft of keys hacking, cloning, and theft with the first aftermarket immobiliser for CAN. With the added option of connecting to a Ghost app and GPS tracking system, which can send you alerts to call if your car is tampered with or stolen.
Installing an Ghost immobiliser is fairly simple for the qualified technician. The right tools, insulation tape, and heat shrink tubing is crucial.
Getting Started
Unlike physical theft protection devices like wheel locks and car alarms, ghost immobilisers guard your vehicle without the need of LEDs or key fobs. They connect directly to the ECU CAN data network and are activated only after entering a PIN. This gives a greater level of protection against key hacking, ECU swapping and cloning.
Therefore, the installation of a ghost immobiliser Birmingham is a task that must be carried out with a high degree of speed and accuracy. It's like navigating a minefield; one misstep could cause severe damage to the circuits of the electrical system of your vehicle. To avoid this, it's crucial that you understand the process of installation and prepare your vehicle for the installation process.
It is necessary to remove interior panels from the vehicle to make room for your immobiliser. Once you've found the ideal location to hide it, secure it in place with cable ties to keep it from being taken away or damaged. Clean your wiring by tying loose wires down and using insulation tape to cover the exposed connections. This can help reduce the chance of short circuits that are not intended to be there while also improving the aesthetics and decreasing the chance of tampering from thieves.
Find a source of constant 12V power, as well as a grounding source for the ghost immobiliser. Once you've located these and tested the power wires using a multimeter to ensure they're delivering a consistent voltage. Connect the CAN H & the CAN L wires of your immobiliser with the power source and grounding points.
Once you've made all of the necessary connections It is important to check the connections and check the immobiliser for signs of corrosion or damage. It is also important to test the system to make sure it's working correctly by entering a PIN number and then starting the engine. This should be a regular part of your daily routine, as it will allow you to identify any intermittent problems early. Regular testing will help prolong the life of your device and ensure it is performing at its best.
Preparing your vehicle
Installing a Ghost immobiliser is a process that requires expertise and tools. A wiring diagram of the vehicle is vital for locating the correct wires and making precise connections, while a multimeter is a great tool to check the electrical value and ensure security. Cable ties and insulation tape can be used to protect the connections from damage and keep them secured. A user's manual is provided for your Ghost Immobiliser. It will provide you with specific instructions tailored to that model.
Once installed, a ghost immobiliser is able to prevent unauthorised engine start by requiring that the owner input a unique PIN code sequence using buttons on the steering wheel or on the centre console. This can be accomplished manually or remotely using a mobile phone app, and the code can easily be modified by the vehicle's owner at any time. The device also functions quietly and is inaccessible to thieves as it does not emit radio frequency.
Ghost immobilisers connect directly to the vehicle's CAN bus, a network that connects to all the electronic control units (ECUs). It intercepts the signals transmitted by ECUs, and blocks the engine when a false signal is identified. ghost 11 immobiliser is weatherproof and tamperproof. It doesn't have any keys or LED indicators that could draw thieves' attention.
It can be positioned behind the dashboard or in a discreet area, so it is not visible to thieves and does not hinder the performance of the vehicle. It can be tucked away in a small container, so that it is less likely to be observed by unscrupulous salespeople during a test-drive.
Its discrete operation and integration with the vehicle's CAN bus system make it a formidable deterrent to modern methods of car theft, such as key cloning and signal relay attacks. The system can be integrated with other security measures to create a powerful barrier that will frustrate even the most obstinate thieves. This is why more and more insurance companies are now advocating or even requiring ghost immobilisers be fitted, as it will significantly lower the cost of insurance.
Making Connections
Unlike traditional security systems that can be heard by thieves, ghost immobilisers are silent and keep them from being aware that your vehicle is turned on. They also stop the high-tech methods employed to steal vehicles, like OBD port hacking. Installing them without leaving permanent marks on your car is a great option for those who intend to sell the vehicle in the near future.
The Autowatch Ghost 2 CANbus immobiliser is among the most recent and most reliable solutions to prevent car theft. It makes use of the CAN data network to disable your engine and generates a pin code that only you know, which means it's hard for thieves to identify. It is compatible with many different automobiles, and it can work with all the features that are already in place, such as car alarms and steering wheel locks. GPS trackers and door lock bypass.
If you decide to opt for an Ghost immobiliser, be sure to check the wiring diagram of your specific car model to identify the wires that need connecting. Make sure to double-check the location of these wires to ensure that they are in the correct location and mark them with labels or tape to help you keep track of them. You'll also need to find a source of constant power (12V) and a grounding point for the system. Once you have these in place, you can begin making the connections to complete the installation.
auto ghost immobiliser won't allow your vehicle to start until you enter a pin code through the buttons of the steering wheel or dashboard. This will stop ECU hacking, key cloning, and other techniques of vehicle theft. It can also be combined with other Thatcham approved security accessories like alarms or tyre clips to provide your vehicle with an even higher level of protection.
As the UK automotive aftermarket industry expands as do the options to secure your vehicle. There are a myriad of ways that thieves can get into your car and steal it, which is why it's crucial to take every precaution to stop it from being taken. That's why ghost immobilisers are such a popular choice among responsible car owners.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU via the CAN network. This stops the engine from being started until a PIN code has been entered. This makes it extremely difficult for thieves to steal your key fob and start your vehicle, and more difficult to disable the system through hacking into its electronic components.
Ghost Immobilisers can also be utilized in conjunction with GPS tracking devices that can assist you in tracking your vehicle and locate it if it's stolen. This feature isn't often available in aftermarket security products however it's an excellent way to improve the security of your vehicle and provide you with peace of peace of.
The Ghost-II immobiliser offers not only an enhanced security, but also a pleasant experience for the user by eliminating the need to use additional key fobs or devices. It has a simple and intuitive PIN code entry system that integrates seamlessly into your daily routine. Additionally, it provides deactivation modes and convenience features that let you temporarily disable the immobiliser to allow valet parking or for servicing.
Make sure you have the tools you need and get familiar with the wiring of your vehicle. A basic set of hand tools will provide you with the ability to create precise connections, while a multimeter will help verify electrical values. Insulation tape and heat shrink tubing are also crucial for securing connections from short circuits, while cable tie can be used to secure the wiring in the correct position. It is also essential to work in a well-lit area and wear safety gear when working with tools and electrical components.
After you've completed the installation, you should test the Ghost immobiliser to make sure that it's working properly. First, you should try to start the vehicle without entering the PIN code. If this doesn't work then you'll need to try again and check the connections more thoroughly.
Unlike other security systems, unlike other security systems, the Ghost Immobiliser is a covert device that is not spotted by thieves and is much more effective than traditional physical deterrents like wheel clamps or steering locks. It is TASSA-approved and endorsed by some insurance companies. This is a cost-effective investment that gives you the peace of mind you deserve.